Career Information


Pipelayers, Plumbers, Pipefitters, and Steamfitters 

Significant Points:

  • Job opportunities should be excellent because not enough people are seeking training.
  • Pipelayers, plumbers, pipefitters, and steamfitters make up one of the largest and highest paid construction occupations.

Get the training you need: Find schools for Pipelayers, Plumbers, Pipefitters, and Steamfitters near you!

Nature of the Work [About this section] [To Top]

Most people are familiar with plumbers, who come to their home to unclog a drain or install an appliance. In addition to these activities, however, pipelayers, plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. For example, some systems move water to a municipal water treatment plant and then to residential, commercial, and public buildings. Other systems dispose of waste, provide gas to stoves and furnaces, or provide for heating and cooling needs. Pipe systems in powerplants carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move material through the production process. Specialized piping systems are very important in both pharmaceutical and computer-chip manufacturing.

Although pipelaying, plumbing, pipefitting, and steamfitting sometimes are considered a single trade, workers generally specialize in one of five areas. Pipelayers lay clay, concrete, plastic, or cast-iron pipe for drains, sewers, water mains, and oil or gas lines. Before laying the pipe, pipelayers prepare and grade the trenches either manually or with machines. After laying the pipe, they weld, glue, cement or otherwise join the pieces together. Plumbers install and repair the water, waste disposal, drainage, and gas systems in homes and commercial and industrial buildings. Plumbers also install plumbing fixtures—bathtubs, showers, sinks, and toilets—and appliances such as dishwashers and water heaters. Pipefitters install and repair both high- and low-pressure pipe systems used in manufacturing, in the generation of electricity, and in the heating and cooling of buildings. They also install automatic controls that are increasingly being used to regulate these systems. Some pipefitters specialize in only one type of system. Steamfitters install pipe systems that move liquids or gases under high pressure. Sprinklerfitters install automatic fire sprinkler systems in buildings.

Pipelayers, plumbers, pipefitters, and steamfitters use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, incorporate copper, steel, and plastic pipe that can be handled and installed by one or two plumbers. Municipal sewerage systems, on the other hand, are made of large cast-iron pipes; installation normally requires crews of pipefitters. Despite these differences, all pipelayers, plumbers, pipefitters, and steamfitters must be able to follow building plans or blueprints and instructions from supervisors, lay out the job, and work efficiently with the materials and tools of their trade. Computers and specialized software are used to create blueprints and plan layouts.

When construction plumbers install piping in a new house, for example, they work from blueprints or drawings that show the planned location of pipes, plumbing fixtures, and appliances. Recently, plumbers have become more involved in the design process. Their knowledge of codes and the operation of plumbing systems can cut costs. They first lay out the job to fit the piping into the structure of the house with the least waste of material. Then they measure and mark areas in which pipes will be installed and connected. Construction plumbers also check for obstructions such as electrical wiring and, if necessary, plan the pipe installation around the problem.

Sometimes, plumbers have to cut holes in walls, ceilings, and floors of a house. For some systems, they may hang steel supports from ceiling joists to hold the pipe in place. To assemble a system, plumbers—using saws, pipe cutters, and pipe-bending machines—cut and bend lengths of pipe. They connect lengths of pipe with fittings, using methods that depend on the type of pipe used. For plastic pipe, plumbers connect the sections and fittings with adhesives. For copper pipe, they slide a fitting over the end of the pipe and solder it in place with a torch.

After the piping is in place in the house, plumbers install the fixtures and appliances and connect the system to the outside water or sewer lines. Finally, using pressure gauges, they check the system to ensure that the plumbing works properly.

Working Conditions [About this section] [To Top]

Pipefitters and steamfitters most often work in industrial and power plants. Plumbers work in commercial and residential settings where water and septic systems need to be installed and maintained. Pipelayers work outdoors, sometime in remote areas, as they build the pipelines that connect sources of oil, gas, and chemicals with the users of these materials. Sprinklerfitters work mostly in multistory buildings that require the use of sprinkler systems.

Because pipelayers, plumbers, pipefitters, and steamfitters frequently must lift heavy pipes, stand for long periods, and sometimes work in uncomfortable or cramped positions, they need physical strength as well as stamina. They also may have to work outdoors in inclement weather. In addition, they are subject to possible falls from ladders, cuts from sharp tools, and burns from hot pipes or soldering equipment.

Pipelayers, plumbers, pipefitters, and steamfitters engaged in construction generally work a standard 40-hour week; those involved in maintaining pipe systems, including those who provide maintenance services under contract, may have to work evening or weekend shifts, as well as be on call. These maintenance workers may spend quite a bit of time traveling to and from worksites.

Training, Other Qualifications,
and Advancement
[About this section] [To Top]

Pipelayers, plumbers, pipefitters, and steamfitters enter into the profession in a variety of ways. Most residential and industrial plumbers get their training in career and technical schools and community colleges and from on-the-job training. Pipelayers, plumbers, pipefitters, and steamfitters who work mainly for commercial enterprises are usually trained through formal apprenticeship programs.

Apprenticeship programs generally provide the most comprehensive training available for these jobs. They are administered by either union locals and their affiliated companies or by nonunion contractor organizations. Organizations that sponsor apprenticeships include: the United Association of Journeymen and Apprentices of the Plumbing and Pipefitting Industry of the United States and Canada; local employers of either the Mechanical Contractors Association of America, the National Association of Plumbing-Heating-Cooling Contractors, or the National Fire Sprinkler Association; the Associated Builders and Contractors; the National Association of Plumbing-Heating-Cooling Contractors; the American Fire Sprinkler Association, or the Home Builders Institute of the National Association of Home Builders.

Apprenticeships—both union and nonunion—consist of 4 or 5 years of on-the-job training, in addition to at least 144 hours per year of related classroom instruction. Classroom subjects include drafting and blueprint reading, mathematics, applied physics and chemistry, safety, and local plumbing codes and regulations. On the job, apprentices first learn basic skills, such as identifying grades and types of pipe, using the tools of the trade, and safely unloading materials. As apprentices gain experience, they learn how to work with various types of pipe and how to install different piping systems and plumbing fixtures. Apprenticeship gives trainees a thorough knowledge of all aspects of the trade. Although most pipelayers, plumbers, pipefitters, and steamfitters are trained through apprenticeship, some still learn their skills informally on the job.

Applicants for union or nonunion apprentice jobs must be at least 18 years old and in good physical condition. Apprenticeship committees may require applicants to have a high school diploma or its equivalent. Armed Forces training in pipelaying, plumbing, and pipefitting is considered very good preparation. In fact, persons with this background may be given credit for previous experience when entering a civilian apprenticeship program. Secondary or postsecondary courses in shop, plumbing, general mathematics, drafting, blueprint reading, computers, and physics also are good preparation.

Although there are no uniform national licensing requirements, most communities require plumbers to be licensed. Licensing requirements vary from area to area, but most localities require workers to pass an examination that tests their knowledge of the trade and of local plumbing codes.

With additional training, some pipelayers, plumbers, pipefitters, and steamfitters become supervisors for mechanical and plumbing contractors. Others, especially plumbers, go into business for themselves, often starting as a self-employed plumber working from home. Some eventually become owners of businesses employing many workers and may spend most of their time as managers rather than as plumbers. Others move into closely related areas such as construction management or building inspection.

Employment [About this section] [To Top]

Pipelayers, plumbers, pipefitters, and steamfitters constitute one of the largest construction occupations, holding about 561,000 jobs in 2004. About 1 in 2 worked for plumbing, heating, and air-conditioning contractors engaged in new construction, repair, modernization, or maintenance work. Others did maintenance work for a variety of industrial, commercial, and government employers. For example, pipefitters were employed as maintenance personnel in the petroleum and chemical industries, in which manufacturing operations require the moving of liquids and gases through pipes. More than 1 in 10 pipelayers, plumbers, pipefitters, and steamfitters were self-employed. Almost 1 in 3 pipelayers, plumbers, pipefitters, and steamfitters belonged to a union.

Jobs for pipelayers, plumbers, pipefitters, and steamfitters are distributed across the country in about the same proportion as the general population.

Job Outlook [About this section] [To Top]

Job opportunities are expected to be excellent, as demand for skilled pipelayers, plumbers, pipefitters, and steamfitters is expected to outpace the supply of workers trained in this craft. Many employers report difficulty finding potential workers with the right qualifications. In addition, many people currently working in these trades are expected to retire over the next 10 years, which will create additional job openings.

Employment of pipelayers, plumbers, pipefitters, and steamfitters is expected to grow about as fast as average for all occupations through the year 2014. Demand for plumbers will stem from new construction and building renovation. Bath remodeling, in particular, is expected to continue to grow and create more jobs for plumbers. In addition, repair and maintenance of existing residential systems will keep plumbers employed. Demand for pipefitters and steamfitters will be driven by maintenance activities for places having extensive systems of pipes, such as powerplants, water and wastewater treatment plants, office buildings, and factories. Growth of pipelayer jobs will stem from the building of new water and sewer lines and pipelines to new oil and gas fields. Demand for sprinklerfitters will increase due to changes to State and local rules for fire protection in homes and businesses.

Traditionally, many organizations with extensive pipe systems have employed their own plumbers or pipefitters to maintain equipment and keep systems running smoothly. But, to reduce labor costs, many of these firms no longer employ full-time, in-house plumbers or pipefitters. Instead, when they need a plumber, they rely on workers provided under service contracts by plumbing and pipefitting contractors.

Construction projects generally provide only temporary employment. When a project ends, some pipelayers, plumbers, pipefitters, and steamfitters may be unemployed until they can begin work on a new project, although most companies are trying to limit these periods of unemployment in order to retain workers. In addition, the jobs of pipelayers, plumbers, pipefitters, and steamfitters are generally less sensitive to changes in economic conditions than jobs in other construction trades. Even when construction activity declines, maintenance, rehabilitation, and replacement of existing piping systems, as well as the increasing installation of fire sprinkler systems, provide many jobs for pipelayers, plumbers, pipefitters, and steamfitters.

Earnings [About this section] [More salary/earnings info] [To Top]

Pipelayers, plumbers, pipefitters, and steamfitters are among the highest paid construction occupations. In May 2004, median hourly earnings of pipelayers were $13.68. The middle 50 percent earned between $11.05 and $18.69. The lowest 10 percent earned less than $9.19, and the highest 10 percent earned more than $25.07. Also in May 2004, median hourly earnings of plumbers, pipefitters, and steamfitters were $19.85. The middle 50 percent earned between $15.01 and $26.67. The lowest 10 percent earned less than $11.62, and the highest 10 percent earned more than $33.72. Median hourly earnings in the industries employing the largest numbers of plumbers, pipefitters, and steamfitters in May 2004 were as follows:

Natural gas distribution $23.86
Nonresidential building construction 21.55
Building equipment contractors 19.85
Utility system construction 18.29
Local government 16.30

Apprentices usually begin at about 50 percent of the wage rate paid to experienced pipelayers, plumbers, pipefitters, and steamfitters. Wages increase periodically as skills improve. After an initial waiting period, apprentices receive the same benefits as experienced pipelayers, plumbers, pipefitters, and steamfitters.

Many pipelayers, plumbers, pipefitters, and steamfitters are members of the United Association of Journeymen and Apprentices of the Plumbing and Pipefitting Industry of the United States and Canada.

[Please note that the earnings and salary data listed here is usually from government sources and may be dated, so please make adjustments accordingly. If you would like to access current salary data for literally thousands of occupations, access our Salary Wizard.]



Related Occupations [About this section] [To Top]

Other occupations in which workers install and repair mechanical systems in buildings are boilermakers; electricians; elevator installers and repairers; heating, air-conditioning, and refrigeration mechanics and installers; industrial machinery installation, repair, and maintenance workers; millwrights; sheet metal workers; and stationary engineers and boiler operators. Other related occupations include construction managers and construction and building inspectors.

Sources of Additional Information [About this section] [To Top]

For information about apprenticeships or work opportunities in pipelaying, plumbing, pipefitting, and steamfitting, contact local plumbing, heating, and air-conditioning contractors; a local or State chapter of the National Association of Plumbing, Heating, and Cooling Contractors; a local chapter of the Mechanical Contractors Association; a local chapter of the United Association of Journeymen and Apprentices of the Plumbing and Pipefitting Industry of the United States and Canada; or the nearest office of your State employment service or apprenticeship agency.

For information about apprenticeship opportunities for pipelayers, plumbers, pipefitters, and steamfitters, contact:

  • United Association of Journeymen and Apprentices of the Plumbing and Pipefitting Industry, 901 Massachusetts Ave. NW., Washington, DC 20001. Internet: http://www.ua.org

For more information about training programs for pipelayers, plumbers, pipefitters, and steamfitters, contact:

  • Associated Builders and Contractors, Workforce Development Department, 4250 North Fairfax Dr., 9th Floor, Arlington, VA 22203. Internet: http://www.trytools.org
  • Home Builders Institute, National Association of Home Builders, 1201 15th St. NW., Washington, DC 20005. Internet: http://www.hbi.org

For general information about the work of pipelayers, plumbers, and pipefitters, contact:

  • Mechanical Contractors Association of America, 1385 Piccard Dr., Rockville, MD 20850. Internet: http://www.mcaa.org
  • Plumbing-Heating-Cooling Contractors--National Association, 180 S. Washington St, Falls Church, VA 22040. Internet: http://www.phccweb.org
  • National Center for Construction Education and Research, P.O. Box 141104, Gainesville FL 32614-1104. Internet: http://www.nccer.org

For general information about the work of sprinklerfitters, contact:

  • American Fire Sprinkler Association, Inc., 9696 Skillman St., Suite 300, Dallas, TX 75243-8264. Internet: http://www.firesprinkler.org
  • National Fire Sprinkler Association, P.O. Box 1000, Patterson, NY 12563. Internet: http://www.nfsa.org

*Source: Bureau of Labor Statistics, U.S. Department of Labor. Used by permission.




Search Other Careers


Search For Jobs