Career Information


Elevator Installers and Repairers 

Significant Points:

  • Most workers belong to a union and enter the occupation through a 4-year apprenticeship program.
  • High pay and good benefits, together with expected slow job growth and few separations, should result in keen competition for the few job opportunities that arise in this small occupation; prospects should be best for those with postsecondary education in electronics.
  • Elevator installers and repairers are less affected by downturns in the economy and inclement weather than other construction trades workers.

Get the training you need: Find schools for Elevator Installers and Repairers near you!

Nature of the Work [About this section] [To Top]

Elevator installers and repairers—also called elevator constructors or elevator mechanics—assemble, install, and replace elevators, escalators, dumbwaiters, moving walkways, and similar equipment in new and old buildings. Once the equipment is in service, they maintain and repair it as well. They also are responsible for modernizing older equipment.

To install, repair, and maintain modern elevators, which are almost all electronically controlled, elevator installers and repairers must have a thorough knowledge of electronics, electricity, and hydraulics. Many elevators are controlled with microprocessors, which are programmed to analyze traffic conditions in order to dispatch elevators in the most efficient manner. With these computer controls, it is possible to get the greatest amount of service with the least number of cars.

When installing a new elevator, installers and repairers begin by studying blueprints to determine the equipment needed to install rails, machinery, car enclosures, motors, pumps, cylinders, and plunger foundations. Once this has been done, they begin equipment installation. Working on scaffolding or platforms, installers bolt or weld steel rails to the walls of the shaft to guide the elevator.

Elevator installers put in electrical wires and controls by running tubing, called conduit, along a shaft's walls from floor to floor. Once the conduit is in place, mechanics pull plastic-covered electrical wires through it. They then install electrical components and related devices required at each floor and at the main control panel in the machine room.

Installers bolt or weld together the steel frame of an elevator car at the bottom of the shaft; install the car's platform, walls, and doors; and attach guide shoes and rollers to minimize the lateral motion of the car as it travels through the shaft. They also install the outer doors and door frames at the elevator entrances on each floor.

For cabled elevators, these workers install geared or gearless machines with a traction drive wheel that guides and moves heavy steel cables connected to the elevator car and counterweight. (The counterweight moves in the opposite direction from the car and balances most of the weight of the car to reduce the weight that the elevator's motor must lift.) Elevator installers also install elevators in which a car sits on a hydraulic plunger that is driven by a pump. The plunger pushes the elevator car up from underneath, similar to a lift in an auto service station.

Installers and repairers also install escalators. They put in place the steel framework, the electrically powered stairs and the tracks, and install associated motors and electrical wiring. In addition to elevators and escalators, installers and repairers also may install devices such as dumbwaiters and material lifts—which are similar to elevators in design—as well as moving walkways, stair lifts, and wheelchair lifts.

The most highly skilled elevator installers and repairers, called 'adjusters,' specialize in fine-tuning all the equipment after installation. Adjusters make sure that an elevator is working according to specifications and is stopping correctly at each floor within a specified time. Once an elevator is operating properly, it must be maintained and serviced regularly to keep it in safe working condition. Elevator installers and repairers generally do preventive maintenance—such as oiling and greasing moving parts, replacing worn parts, testing equipment with meters and gauges, and adjusting equipment for optimal performance. They also troubleshoot and may be called to do emergency repairs.

A service crew usually handles major repairs—for example, replacing cables, elevator doors, or machine bearings. This may require the use of cutting torches or rigging equipment—tools that an elevator repairer normally would not carry. Service crews also do major modernization and alteration work, such as moving and replacing electrical motors, hydraulic pumps, and control panels.

Elevator installers and repairers usually specialize in installation, maintenance, or repair work. Maintenance and repair workers generally need greater knowledge of electricity and electronics than do installers, because a large part of maintenance and repair work is troubleshooting. Similarly, adjusters need a thorough knowledge of electricity, electronics, and computers to ensure that newly installed elevators operate properly.

Working Conditions [About this section] [To Top]

Most elevator installers and repairers work a 40-hour week. However, overtime is required when essential elevator equipment must be repaired, and some workers are on 24-hour call. Unlike most elevator installers, workers who specialize in elevator maintenance are on their own most of the day and typically service the same elevators periodically.

Elevator installers lift and carry heavy equipment and parts, and may work in cramped spaces or awkward positions. Potential hazards include falls, electrical shock, muscle strains, and other injuries related to handling heavy equipment. Because most of their work is performed indoors in buildings under construction or in existing buildings, elevator installers and repairers lose less work time due to inclement weather than do other construction trades workers.

Training, Other Qualifications,
and Advancement
[About this section] [To Top]

Most elevator installers and repairers apply for their jobs through a local of the International Union of Elevator Constructors. Applicants for apprenticeship positions must be at least 18 years old, have a high school diploma or equivalent, and pass an aptitude test. Good physical condition and mechanical aptitude also are important.

Elevator installers and repairers learn their trade in a program administered by local joint educational committees representing the employers and the union. These programs, through which the apprentice learns everything from installation to repair, combine on-the-job training with classroom instruction in blueprint reading, electrical and electronic theory, mathematics, applications of physics, and safety. In nonunion shops, workers may complete training programs sponsored by independent contractors.

Apprentices generally must complete a 6-month probationary period. After successful completion, they work toward becoming fully qualified within 4 years. To be classified as a fully qualified elevator installer or repairer, union trainees must pass a standard examination administered by the National Elevator Industry Educational Program. Most States and cities also require elevator installers and repairers to pass a licensing examination. Both union and nonunion technicians may take the Certified Elevator Technician (CET) or the Certified Accessibility and Private Residence Lift Technician (CAT) program courses offered by the National Association of Elevator Contractors.

Most apprentices assist experienced elevator installers and repairers. Beginners carry materials and tools, bolt rails to walls, and assemble elevator cars. Eventually, apprentices learn more difficult tasks such as wiring, which requires knowledge of local and national electrical codes.

High school courses in electricity, mathematics, and physics provide a useful background. As elevators become increasingly sophisticated, workers may find it necessary to acquire more advanced formal education—for example, in a postsecondary technical school or junior college—with an emphasis on electronics. Workers with more formal education, such as an associate degree, usually advance more quickly than do their counterparts without a degree.

Many elevator installers and repairers also receive training from their employers or through manufacturers to become familiar with a particular company's equipment. Retraining is very important if a worker is to keep abreast of technological developments in elevator repair. In fact, union elevator installers and repairers typically receive continual training throughout their careers, through correspondence courses, seminars, or formal classes. Although voluntary, this training greatly improves one's chances for promotion and retention.

Some installers may receive further training in specialized areas and advance to the position of mechanic-in-charge, adjuster, supervisor, or elevator inspector. Adjusters, for example, may be picked for their position because they possess particular skills or are electronically inclined. Other workers may move into management, sales, or product design jobs.

Employment [About this section] [To Top]

Elevator installers and repairers held about 22,000 jobs in 2004. Most were employed by specialty trades contractors, particularly elevator maintenance and repair contractors. Others were employed by field offices of elevator manufacturers, machinery wholesalers, government agencies, or businesses that do their own elevator maintenance and repair.

Job Outlook [About this section] [To Top]

Workers should expect keen competition when seeking to enter this occupation. Elevator installer and repairer jobs have relatively high earnings and good benefits, involve a significant investment in training, and a large proportion are unionized. As a result, workers tend to stay in this occupation for a long time and few leave and need to be replaced, thus reducing job opportunities. Job prospects should be best for those with postsecondary education in electronics.

Employment of elevator installers and repairers is expected to increase as fast as average for all occupations through the year 2014. Most of the demand for workers will be due to replacements. Demand for additional elevator installers depends greatly on growth in nonresidential construction, such as commercial office buildings and stores that have elevators and escalators. This sector of the construction industry is expected to grow during the decade in response to expansion of the economy. In addition, the need to continually update and repair old equipment, expand access to the disabled, and install increasingly sophisticated equipment and computerized controls also should add to the demand for elevator installers and repairers. Adding to the demand for elevator installers and repairers is a growing residential market where an increasing number of the elderly require easier access to their homes through stair lifts and residential elevators.

Elevators, escalators, lifts, moving walkways, and related equipment need to be kept in good working condition year round, so employment of elevator repairers is less affected by economic downturns and seasonality than other construction trades.

Earnings [About this section] [More salary/earnings info] [To Top]

Earnings of elevator installers and repairers are among the highest of all construction trades. Median hourly earnings of elevator installers and repairers were $28.23 in May 2004. The middle 50 percent earned between $22.96 and $33.68. The lowest 10 percent earned less than $17.36, and the top 10 percent earned more than $39.65. In May 2004, median hourly earnings in the miscellaneous special trade contractors industry were $28.68.

Three out of four elevator installers and repairers were members of unions or covered by a union contract, one of the highest proportions of all occupations. The largest numbers were members of the International Union of Elevator Constructors. In addition to free continuing education, elevator installers and repairers receive basic benefits enjoyed by most other workers.

[Please note that the earnings and salary data listed here is usually from government sources and may be dated, so please make adjustments accordingly. If you would like to access current salary data for literally thousands of occupations, access our Salary Wizard.]



Related Occupations [About this section] [To Top]

Elevator installers and repairers combine electrical and mechanical skills with construction skills, such as welding, rigging, measuring, and blueprint reading. Other occupations that require many of these skills are boilermakers; electricians; electrical and electronics installers and repairers; industrial machinery installation, repair, and maintenance workers; sheet metal workers; and structural and reinforcing iron and metal workers.

Sources of Additional Information [About this section] [To Top]

For further information on opportunities as an elevator installer and repairer, contact:

  • International Union of Elevator Constructors, 7154 Columbia Gateway Dr., Columbia, MD 21046. Internet: http://www.iuec.org

For additional information about the Certified Elevator Technician (CET) program, contact:

  • National Association of Elevator Contractors, 1298 Wellbrook Circle, Suite A, Conyers, GA 30012. Internet: http://www.naec.org

*Source: Bureau of Labor Statistics, U.S. Department of Labor. Used by permission.




Search Other Careers


Search For Jobs